All images from “A Beginner’s Guide to Sewing With Knitted Fabrics” taken by Julian Ward Photography and © Cico
My Social Media
Get my Newsletter
Follow Me On
All images from “A Beginner’s Guide to Sewing With Knitted Fabrics” taken by Julian Ward Photography and © Cico
This workshop is becoming increasingly popular and I’m not surprised because each time I run it students walk away with fabulous new garments. Yesterday’s workshop was no exception and two of my students even went home in their creations!
It always amazes me how people with the same pattern can make such different garments. Here’s a perfect illustration – all three garments below were made from the same pattern – my Straight Neck Vest and Dress:
Here are from left to right; Louise in her straight neck vest in a lovely lightweight loopback sweatshirt fabric from The Cloth House in London, Debbie in her fabulous straight neck dress (which has a plain black back to it!) in lightweight jersey from Fabricland and Katie in another lovely straight neck vest in a teal ponte roma from Fabricland (loving that colour!).
Last but not least is Kate in a lovely cowl neck dress in the perfect drapey printed jersey from John Lewis. This pattern will be the next one available as a multi-sized MIY Collection pattern, just as soon as I’ve finished my sewing book! Impressively, once Kate had finished this dress, she then cut out and almost finished a shrug!
The only person we didn’t get in front of the camera was Tess. She was soooo close to finishing a drapey cardi, but the sewing gods were against her – we had to really juggle the pattern and fabric to get it out of not quite enough fabric and then her bobbin ran out right at the end. You know how it always does, just when you think you’ve nearly done…?!
Here’s what the five students thought of the workshop in their own words:
“Brilliant! Loved it! Wendy is super knowledgeable and super helpful. I came away with a lovely top that I’ll certainly be wearing a lot, as well as a lot more confidence. Already looking forward to my next workshop.” Katie
“What a great day. made a dress and wore it home. FABULOUS! Lovely people, patient teacher, lots of laughs. A lovely way to spend a Sunday.” Debs
“Great fun day – so pleased with my results and have two great garments to wear. Wendy was a great teacher and very patient.” Louise
“What a great way to spend a day. And to think, I walk away with something new to wear. Fantastic.” Tess
“A really great day! Wendy was brilliant at helping me get to grips with sewing with jersey. I’m totally converted. Thank you!” Kate
Wow, thanks folks! Sounds like a job well done.
If you’re feeling tempted to have a go yourself, I will be announcing more dates for this workshop soon. To be able to book your place before workshops are advertised (and they often book up before I get chance to advertise them on my website), join my mailing list here.
Look forward to seeing you…..!
As promised in my post on sewing seams in knits using a domestic sewing machine, here’s some tips on getting nice neat hems on your knits, all with the use of your sewing machine!
As with seams in knits, you need to choose a way of hemming your knit garment that will stretch. I’m going to show you my two favourite ways to hem knit fabrics on a sewing machine.
One of the stretchiest stitches to use on your sewing machine is the 3-step zig-zag (a stitch which even the most basic of sewing machines usually has):
The second way of hemming a knit fabric, is one that most looks like the hems on shop bought knit garments that are finished with a coverstitch (a completely separate machine a bit like an overlocker). Rather than rush out and buy a coverstitch machine try a bit of twin-needling on your sewing machine!
Twin needles are easily available and you can even get ballpoint twin needles – perfect for sewing knit fabrics without causing snags. Most good sewing shops will sell twin needles and there is even a choice of what size gap you have between the needles.
Replace your normal needle with the twin needle which inserts into your machine in exactly the same way, then set up your machine like this:
Then, sew as normal, but you must sew your hem from the right side of your garment so it’s a good idea to have your hem tacked first, then you can use your tacking stitches as a guide for your twin-needling to ensure you catch the hem on the wrong side.
And on the wrong side, the bobbin thread forms a sort of neat little zig-zag stitch. If you position your stitching accurately, the stitches should just cover the cut edge of your hem on the inside of the garment as shown above. It takes a bit of practice to get it that precise, but tacking your hem first helps!
As with seams, the tension needs to be correct for the type of knit you’re sewing, but most lighter weight knit fabrics eg. t-shirt jersey and lighter need a looser tension of around 3.
Depending on your fabric and your machine, you might find your hemmed edge going a bit wavy. First make sure you’re not stretching the fabric as you’re sewing! If you’re being good and not stretching your fabric (well done!), then if your sewing machine has the facility to, adjust the presser foot pressure and this should solve the problem. Read more about adjusting the preset foot pressurehere.
So, there you go, you now know how to sew seams and hems on your sewing machine so that they look neat and professional without the aid of an overlocker or coverstitch machine.
Enjoy sewing those lovely knit fabrics, you’ll wonder why you ever avoided them, I promise. If you need some help finding nice knitted fabrics have a read of my guide here and my range of sewing patterns (most of which are designed for knit fabrics and are very easy to use!) are available to buy online here.
Many sewers both new and experienced are unnecessarily scared of sewing stretch knit fabrics.
Most knit-phobes believe these popular myths about sewing knits:
None of these statements are true! Let’s go through them again and tell you the truth:
So, hopefully I’ve made a start at converting you and you’re willing to have a try. The first thing I’ll show you is some stitches to use for seams. I’ll go through hems and finishing edges in separate posts.
The first thing you need for any machine is:
a pack of jersey or ballpoint needles. They’re a bit more blunt on the end than a regular sewing needle meaning that they won’t ladder the knitted structure of the fabric. You can see they also come in different sizes like regular sewing needles.
Here’s a guide for which size will best suit which fabric:
70 – very lightweight silk or viscose jersey
80 – light t-shirt weight cotton jersey
90 – interlock, ponte roma, some cut and sew knits.
MACHINE SETTINGS FOR SEAMS
The first and easiest stitch to use for seams is the stretch straight stitch:
A stitch we use a lot for sewing knit fabrics in my classes is the overlock stitch:
This stitch mimics an overlock stitch and can join the seam and neaten the edges in one go. You can trim off the excess seam allowance close to the stitching as shown in the second picture. The seam then has to be pressed flat to one side rather than open, so it’s not suitable for more bulky fabrics. It works well on most t-shirt weight jerseys.
The final stitch for seams is the narrow overlock stitch used with an overcasting or overlock foot. (See this blog post for more about what an overcasting foot is and how to use it).
This stitch again joins the seam and neatens the edge of the seam allowance in one go. By also using the overcasting foot it means you don’t need to then trim off the excess seam allowance after sewing. It also means though that you can only use it on narrow seam allowances (the overall width of the stitch). It’s another stitch that results in a seam that has to be pressed to one side and gives a nice neat finish to lightweight jersey fabrics. It’s not suited to heavier and thicker knits.
PRESSER FOOT PRESSURE
If your sewing machine has the ability to adjust the presser foot pressure, this can be helpful when sewing some knit fabrics to stop them being stretched by the machine as you sew. You can read more about how to adjust the presser foot pressure in this blog post.
As with all sewing, make sure the tension on your machine is set at the right level for the fabric you’re sewing. If your machine’s tension dial goes up to 9, 4 should be fine for joining two layers of most medium weight woven fabrics. A lower number means a looser stitch which you need for lighter weight fabric or fewer layers. A higher number means a tighter stitch which you need for thicker fabrics or more layers. You shouldn’t need to adjust the tension up or down by more than one number, meaning you will usually stay within the range of 3-5.
Most lighter weight knit fabrics eg. t-shirt jersey and lighter need a looser tension of around 3.
So there you are – how to sew seams in a range of knitted fabrics on your sewing machine. I hope you’re turning from a knit-phobe into a knit-fan! In my next article I’ll show you how to get nice hem finishes on knit fabrics using a sewing machine.
Sunday’s Sewing with Knits workshop started with an interesting discussion during which everyone agreed that knit fabrics made the kind of clothes that they actually want to wear. It’s true, when you think about the kind of clothes that you wear most often (and usually feel most comfortable in), I’ll bet that most of them are made from knitted fabrics. Yet most sewers that I meet, even experienced ones, feel daunted by the prospect of sewing knitted fabrics.
Well I’m happy to say that this workshop is the cure to that fear and here are Sunday’s fantastic and wearable results……
From left to right Debbie, a long-time sewer but a self-confessed knit-phobe was very happy with her drapey cardi. Elena who hadn’t sewn since school came in with a dress made of very slippery fine jersey knit fabric and went home with it transformed into a separate skirt and top! Amandine has been loving sewing Colette patterns using lots of woven fabrics, but now is a convert to knit fabrics after making my straight neck dress and matching up her stripes perfectly. Laura has also done a fair bit of sewing, but has avoided knits and couldn’t find a way of edging knitted fabrics nicely, she was surprised by how quick and easy my fold-over waist skirt was to make and took it home very neatly and professionally hemmed using a twin needle.
And last, but not least, Tricia was camera shy so Elena stepped in to model her lovely cowl neck top. This one got lots of admiring comments from the rest of the class! Tricia was another experienced sewer and knit-phobe at the start of the day and now feels confident in being able to tackle slippery lightweight jersey knit fabrics. This pattern isn’t yet available to buy but is one of the next ones on the list….!!
Here’s what the students themselves thought of the workshop:
“Enjoyable day as always – Wendy’s patterns are so easy to use and well designed. Am delighted with my skirt, thank you!” Laura
“I really enjoyed the workshop – lovely atmosphere, lovely people, a day very well spent. Thank you Wendy! I had a great time and I am happily back to sewing after some 20 odd years!” Elena
“Really enjoyed the day. Very informative and now feel more confident to work with jersey.” Tricia
“Thanks for a great day. Tacking tacking tacking – essential for a perfect finish!!” Debbie
“Thank you very much Wendy for a lovely Sunday! I feel much more confident sewing with knit fabrics with your advice regarding stitches and needles to use. Jersey fabric is so great to sew with and I loved using your dress pattern.” Amandine
By the end of the day everyone’s fear of knitted fabrics had been overcome and I feel sure that these 5 garments are going to get plenty of wear!
If you’d like to overcome your fear of sewing knitted fabrics the next date for this workshop is Sunday 8th December. Get in touch on 01273 693451 or miyworkshop[at]gmail.com to find out more and book a place.
If you want to have a go at using one of my patterns to sew knit fabrics at home, you can find out more here: www.miycollection.co.uk
Sunday saw 5 students at another of my popular “Sewing with Knits” workshops. It always amazes me how quickly these days whizz by, especially when I have such a lovely bunch of students.
The day always starts with a look at everyone’s fabrics and these students had found some really nice ones from a wide range of places; Leeds market, John Lewis and of course, Ditto. There are always a few confessions of a fear of sewing knitted fabrics at the start of the day too…
After a little trying on session to choose which of the MIY Collection patterns they were going to make I soon set them to work….
Here’s Joy, Wendy and Lynn who all decided to make the Drapey Cardi, Lynn had the extra task of stripe matching……!
Joy runs her own knitting business and has written about her experience of the workshop on her blog: http://theknittinggoddess.wordpress.com/2013/06/17/this-may-make-your-eyes-go-funny/ Thanks Joy and I hope you’re now enjoying wearing your cardi!
Here’s what the other 2 students made:
Fiona made this gorgeous cowl neck dress with fabric from John Lewis. Fiona has only recently started sewing after coming to one of my Skirt Making workshops so I was extra impressed by what a good job she made of this! I’m still in the process of putting together the instructions for this pattern, but it will soon be available to buy.
All 3 cardis were also tantalisingly close to being finished by the end of the day and the 3 students making them went home confidently knowing what to do to get them finished. A picture of Joy’s finished one is on her blog post.
Here are some of the students’ thoughts on the day:
“Wendy’s workshop was fun, relaxing and a great way to spend my Sunday. She was very friendly and available for support throughout the day. I’ll be back for more sewing, thank you very much!”
“Thanks for a great day! Learnt lots and no longer afraid of stretch fabrics!”
The next Sewing with Knits workshop is on Sunday 6th October. More details here.